VAULT & SAFE INTERIORS

With encouragement and input from our national dealer base, Fenco is ready to introduce a new product line, Vault & Safe Interiors. We have designed a variety of models to satisfy your many needs. All models are offered in both a 17” & 24” depth, all of which are available with a variety of lock options.

Our Vault & Safe Interiors are designed to compete against Diebold’s double wall construction product line. Previously your options were limited to present either a hard-iron solution (too expensive, too long to get) or a soft-metal solution (which is to difficult to work with dimensionally & configuration-wise). We now have your solution to Vault & Safe Interiors.

Features

• Modular Design – Design the layout that suits your needs best.

• Integrated, Unibody Doublewall Construction – Unit welded 18 gauge sheet metal construction; corners welded & ground flush; no overlapping metal seams.

• Multiple Locking Options – Keylocks, mechanical combination locks & (2) electronic combination locks (LaGard 33E, S&G #6123) available on any door.

• Solid Plate Doors - .125” thickness; hot rolled, pickled and oiled.

• Color Finish – All 16 Fenco color finishes are available; custom finishes available as a costed option.

• Easy Unit Fastening – All units feature fastening knockout in unit top and fastening cage nuts aligned in bottom.

• Safe Deposit Box Dimensions – Fenco’s vault & safe interior unit dimensions are alike to the industries typical S.D. box dimensions in width and depth.

• Cash Drawer Insert - ((2) rows for loose bills compartment with follow block) is available to be installed in any locker.

Information Notes

• You may stack & fasten units up to 3 high. It is recommended to design your layout with the largest unit on the bottom & to always fasten all units to each other.
• If you’re designing a vault utilizing Fenco’s safe & vault units in conjunction with safe deposit boxes, do not stack safe deposit boxes on top of Fenco’s safe & vault units.
• Fenco’s adjustable shelf carries a static capacity of 75 lbs evenly distributed.
• Left hand swing is standard on single width units; right hand swings are also available.
• Although Fenco’s vault & safe units casings are designed to a 17” or 24” deep specification, you must add to the casing depth the required lock depth dimension:
  • For 94R add 1/8”.
  • For mechanical combo add 1-7/16”.
  • For LaGard 33E add 3/4”.
  • For S&G #6123 add 1-7/16”.

Manager/Cash Locker 14-11/16” H x 15-1/2” W x (24” or 17”) D
		Teller Locker 4-9/16” H x 15-1/2” W x (24” or 17”) D
Multi-task Locker 29-7/8” H x 15-1/2” W x (24” or 17”) D

Single width, (2) Teller Lockers, 16-1/4" W x 10-5/8" H x 17" D		Single width, (2) Teller Lockers, 16-1/4" W x 10-5/8" H x 24" D		Single width, (1) Manager/Cash Locker, 16-1/4"W x 15-11/16"H x 17"D
Single width, (1) Manager/Cash Locker, 16-1/4" W x 10-5/8" H x 24" D		Single width, (3) Teller Lockers, 16-1/4"W x 15-11/16"H x 17"D		Single width, (3) Teller Lockers, 16-1/4"W x 15-11/16"H x 24"D
Single width, (1) Multi-task Locker, 16-1/4" W x 30-7/8" H x 17" D		Single width, (1) Multi-task Locker, 16-1/4" W x 30-7/8" H x 24" D		Single width, (2) Manager/Cash Lockers, 16-1/4" W x 30-7/8" H x 17" D
Single width, (2) Manager/Cash Lockers, 16-1/4" W x 30-7/8" H x 24" D		Single width, (3) Teller Lockers over (1) Manager/Cash Locker, 16-1/4" W x 30-7/8" H x 17" D		Single width, (3) Teller Lockers over (1) Manager/Cash Locker, 16-1/4" W x 30-7/8" H x 24" D
Single width, (6) Teller Lockers, 16-1/4" W x 30-7/8" H x 17" D		Single width, (6) Teller Lockers, 16-1/4" W x 30-7/8" H x 24" D		Double width, (4) Teller Lockers, 32-1/2" W x 10-5/8" H x 17" D
Double width, (4) Teller Lockers, 32-1/2" W x 10-5/8" H x 24" D		Double width, (2) Manager/Cash Lockers, 32-1/2"W x 15-11/16"H x 17"D		Double width, (2) Manager/Cash Lockers, 32-1/2"W x 15-11/16"H x 24"D
Double width, (6) Teller Lockers, 32-1/2"W x 15-11/16" H x 17" D		Double width, (6) Teller Lockers, 32-1/2"W x 15-11/16" H x 24" D		Double width, (2) Multi-task Lockers, 32-1/2" W x 30-7/8" H x 17" D
Double width, (2) Multi-task Lockers, 32-1/2" W x 30-7/8" H x 24" D		Double width, (1) Multi-task Locker on left & (2) Manager/Cash Lockers on right, 32-1/2" W x 30-7/8" H x 17" D		Double width, (1) Multi-task Locker on left & (2) Manager/Cash Lockers on right, 32-1/2" W x 30-7/8" H x 24" D
Double width, (4) Manager/Cash Lockers, 32-1/2" W x 30-7/8" H x 17" D		Double width, (4) Manager/Cash Lockers, 32-1/2" W x 30-7/8" H x 24" D		Double width, (1) Multi-task Locker on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 17" D
Double width, (1) Multi-task Locker on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 24" D		Model 3606-17 Double width, (2) Manager/Cash Lockers on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 17" D		Model 3606-24 Double width, (2) Manager/Cash Lockers on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 24" D
Double width, (3) Teller Lockers over (1) Manager/Cash Locker on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 17" D		Double width, (3) Teller Lockers over (1) Manager/Cash Locker on left & (3) Teller Lockers over (1) Manager/Cash Locker on right, 32-1/2" W x 30-7/8" H x 24" D		Double width, (3) Teller Lockers over (1) Manager/Cash Locker on left & (6) Teller Lockers on right, 32-1/2" W x 30-7/8" H x 17" D
Double width, (3) Teller Lockers over (1) Manager/Cash Locker on left & (6) Teller Lockers on right, 32-1/2" W x 30-7/8" H x 24" D		Double width, (12) Teller Lockers, 32-1/2" W x 30-7/8" H x 17" D		Double width, (12) Teller Lockers, 32-1/2" W x 30-7/8" H x 24" D